Maintenance Guides
Deeply categorized DIY guides written by experienced boat owners. From NMEA 2000 wiring to complete winterization.
Marine Electronics & Wiring
NMEA 2000, solar, LiFePO4, shore power, and onboard electrical systems.
1 guide
Plumbing & Water Systems
Bilge pumps, watermakers, holding tanks, and freshwater plumbing.
1 guide
Marine Engines & Propulsion
Diesel engines, outboards, sail drives, and propulsion maintenance.
0 guides
Rigging & Sails
Standing rigging, running rigging, sail care, and deck hardware.
0 guides
Hull, Gelcoat & Anti-fouling
Hull repairs, gelcoat restoration, and bottom paint application.
1 guide
Winterization, Storage & Seasonal Prep
End-of-season prep, winterization procedures, and spring commissioning.
2 guides
Latest Guides
The Ultimate Yacht Haul-Out Checklist: Tidal Navigation to Saildrive Service
Complete yacht haul-out guide covering tidal navigation, pressure washing, yacht blocking, waterline masking, gelcoat repair, and saildrive lower unit servicing during dry dock.
DIY Haul-Out Guide: Saildrive Servicing, Hull Prep & Gelcoat Repair
Step-by-step haul-out guide for saildrive seal replacement, antifouling hull scraping, waterline masking, and DIY gelcoat chip repair. Yard-tested tips for protecting your hull and drivetrain.
Bilge Pump Replacement & Upgrade Guide
How to select, wire, and install a reliable bilge pump system with proper float switches, high-water alarms, and ABYC-compliant wiring.
NMEA 2000 Backbone Setup Guide
Step-by-step guide to planning and installing a reliable NMEA 2000 network on your vessel, including backbone sizing, tee placement, and termination.
Complete Boat Winterization Guide
Comprehensive end-of-season winterization checklist covering engine, plumbing, electrical, rigging, and hull protection for boats in cold climates.